Having a good garage door seal and weather seal on your garage door is important to keep out snow, leaf, water, elements. If you have an uneven garage floor you can use a larger bottom seal to help close off gaps.
Understanding Garage Door Weather Stripping
Maybe you use your garage just for your cars. Perhaps it doubles as a workshop. Or a storage room. Whatever you use your garage for, you want to make sure it stays dry. Otherwise, what’s the point? However, the last few times you’ve been out there, you’ve noticed that it’s colder than usual. Or hotter. It also seems really dirty, even though you sweep it regularly. And, suddenly, it seems brighter in there than usual. That’s why you need garage door weather stripping.
Typically it is advisable to remove the existing retainer from the bottom of the garage door. In some instances it will be okay to install the new retainer over the existing retainer however, and it is imperative that the new retainer is mounted securely to the bottom of the garage door.
Adapt to the -40°F~240°F environment
Heavy Duty and High Quality EPDM Synthetic RUBBER, Excellent in extreme temperature and conditions, Adapt to the -40°F~240°F environment. Ribbed side to floor, ribs further help preventing the weather seal from freezing to the floor. Get passed the Low Temperature Flexibility, Aging Resistance Testing and Bottom Anti Seepage Testing
Perfect combination
each of 41.3″ x 1-5/8″ Flat Aluminum Retainers
Sold in 41.3” lengths for shipping purposes, these butt together for a nice finish.Square cut ends, easy to cut and modify.
Great option for wood garage doors and any type of door with a flat bottom.
BOWSEN quick installation method 1
install the tracks at the bottom garage door with screws.
BOWSEN quick installation method 2
First install the rubber on one side and squeeze it in
BOWSEN quick installation method 3
Press with your fingers to clip the T-end of the rubber into the track, which is easy to enter but difficult to exit
BOWSEN quick installation method 4
You can also use a screwdriver auxiliary installation, lock the seal into the tracks.
Additional installation methods
To make it easier to feed the new gasket onto the track, Mix a drop or two of dish detergent or other soap in a spray bottle filled with water. Spray the soapy mixture on the track, Usually, this is suitable for those within 10ft garage door.
Adjust the limit on the door opener.
Once the first length of garage door weather stripping retainer is installed, continue installing sections until you reach the other end of the door. Trim, cut or notch the last length of retainer as needed. Installs easily with two people. One guides seal into track and pulls, the other feeds the seal. In the end, adjust the limit on the door opener.
Reviews
There are no reviews yet.